ElarScan A2/C2 KS
ElarScan А2-KS is a planetary scanner for daily stream digitization of books, magazines, catalogues, newspapers and various types of bound and flat documents up to A2+ format. The contactless method of digitization eliminates the mechanical impact on the originals providing their safety.
The main features of the KS modification are a flat folding glass and automated cradle allowing careful pressing of original against the glass from the bottom with the pressing force control.
The design of scanner optical system includes an RGB sensor enabling high-quality digitization with an option to autofocus and automatically adjust to originals of various thickness and textures. The scanner comes with two options of the optic system:
- ElarScan А2-400KS has a professional CMOS RGB 24 MP camera and is ideal for efficient digitization of textual documents and good quality books.
- ElarScan А2-600KS has a professional CMOS RGB 50 MP camera, which expands the possibilities of using the scanner for digitalization of graphics, damaged documents and low-contrast texts.
The ElarScan А2-КS modification is equipped with a V-shaped automated book cradle with independent adjustment of plates to different thickness of originals and an additional recess for the spine. The cradle can open at 90, 120 to 180 degrees and is designed to scan originals up to 10 cm thick and weighing up to 15 kg. Separate lifting of the plates allows scanning the originals lifting the right and left pages separately. All the main elements of the book cradle design are made of metal and have high resource of work at the maximum load.
The scanner has a frameless flat pressure module of tempered glass, which allows effective evening out of originals opening at 1800 during stream scanning. The module has fixing mechanisms in horizontal and vertical position, which enables scanning without glass.
The scanner operation is extremely simple, convenient and does not require special skills from the user, allowing fast and efficient scanning, processing and transferring any amount of data: user only needs to place the document on the cradle (face up) and start scanning in any of the convenient ways: using the embedded control software, using scan start bottoms on the housing or by the glass plate lowering.
ElarScan A2-KS is a fully autonomous device with feature-rich embedded software for mass scanning and subsequent processing of electronic images. Electronic images are saved directly to the scanner memory, an external USB drive, or immediately to the network (to an employee’s personal station, server or cloud storage).
The functional and technical features of ElarScan А2-КS ensure the most extensive scanner applications. Departments, companies and institutions can use it in the public zone, and also organize mass digitization of documents in the stream mode.
One of the most important advantages of ElarScan A2-KS is its price: the scanner is one of the most inexpensive A2+ format planetary scanners on the market with no consumables that should be changed during operation. Therefore, the scanner is extremely cost-effective with high degree of reliability during intensive operation, and a set of functional features, technical and operational characteristics and software capabilities in the basic configuration puts it several levels higher than its closest competitors.
ElarScan A2-KS is a standalone scanning device that can operate without connection to a workstation. The scanner can save the received images to external USB drives or to network folders due to the six built-in USB ports and the Gigabit Ethernet network interface.
ElarScan А2-KS has a camera with high resolution CMOS RGB sensor with high depth of definition and a macro module, which allows digitization of small objects and individual areas of the originals with high optic resolution without software interpolation. To ensure accurate focusing of the optical system on non-contrast originals, the scanner has a built-in laser module for focus area illumination. The scanned original is displayed in real time on a FHD widescreen monitor.
The scanner has an adaptive LED repro type illumination system that does not have harmful ultraviolet and infrared effects on the originals and ensures even distribution of light on the surface of the original. The illumination system used in ElarScan enables almost complete elimination of ambient light, glares and shadows even when using glass plates. The illumination system is activated during scanning, but it can be set to a constant mode. The lamps offer an option of adjusting the light stream direction.
The built-in original hold-down system with a flat fold-back tempered glass plate and a fixing mechanism in the horizontal position allows for effective evening out of the originals’ surfaces. If you need to work without the glass plate, it can be fixed in the vertical position.
ElarScan А2-KS has a V-shaped automatic book cradle with different placeholder opening modes and angles. This allows the scanner to digitize various types of originals in formats up to А2+: from a flat document to books and stapled documents up to 10 cm thick and weighing up to 15 kg, including incomplete or partial disclosure.
The cradle has opening angles of 180 to 90 degrees, at the same time the halves can be lifted separately and slid together and apart; when apart, there is a recess under the book spine in the cradle, which eliminates the risk of damage. The cradle is also fit with a mechanism for automatic smooth adjustment by height. The cradle is controlled from the scanner panel.
The high quality, high color accuracy and absence of geometrical distortions of electronic images when scanning on ElarScan A2-KS results from two main factors: modern optical system and rich embedded software processing capabilities.
The embedded ScanImage software is a complete set of tools that control all stages of digitization: scanning, image processing, quality control and indexing of images. There is a possibility of administering and controlling the users’ work, there is a configurable file directory structure, and also control of the usage statistics.
More about ScanImage software...
Additional modules and accessories
The design of ElarScan А2-KS scanner uses all the most advanced technologies and materials. The housing of the scanner is made of high-strength composite plastic fastened on metal base to impart overall strength and durability of the structure. This is especially important for scanning when the maximum protection from parasite vibrations is required.
The control panel of the ElarScan А2-KS scanner is made with consideration of the many years of accumulated experience of book scanner production, the selected dust and moisture protection structure has LED indication of the operation modes. All the panel buttons have visual icons and symbols in English.
For user’s convenience, scanning can be launched in several ways:
- with the scan start buttons on the scanner panel;
- through the embedded software interface;
- by interval (after a specified period of time);
- by automatic page flip detection function;
- with the control footswitch (option);
- by pressing the original with the glass plate;
ElarScan А2-400КS — industrial CMOS RGB camera
ElarScan А2-600КS — industrial CMOS RGB camera
A2++ (660 x 450 mm) for flat originals without using the glass plate
A2+ (625 × 420 mm).
|Color depth (scan)||
In color - 42 bits
In grayscale - 14 bits
Black and white - 1 bit
|Color depth (save)||
In color - 24 bits
In grayscale - 8 bits
Black and white - 1 bit
0.5 sec irrespective of the original size
|Full cycle time *||
4 sec irrespective of the original size
ElarScan А2-400KS — 300 – 600 dpi
ElarScan А2-600KS — 400 - 800 dpi
|Embedded software functions||
|Electronic image processing||
|Start scan options:||
|Characteristics of originals||
Weight up to 15 kg
Up to 10 cm thick with glass,
up to 15 cm without using a glass plate
|Additional modules and accessories||
dimensions: (LхWхH) – 940 х 840 х 1130 мм (considering the repro lights)
weight: 69 kg
power: 220 V, 250 W;
* — Indicated time depends on the selected settings and the post-processing functions used; The manufacturer reserves the right to make changes in the design and configuration of the product that do not reduce the quality and technical characteristics of the equipment.